hi guys,
we have chiron wm02 m/c and its coolant is not working in auto..
so we have given a manual control for coolant... but still its not good.the probe is getting wet and its getting spoiled..would somebody tell me how to run coolant in auto plz..
thanks

have you looked in your machine's manual ?
are you using M08/M09 in your code ?

we are using m09 code..
and the output from cnc is not coming to the relay..

I dont really understand what you are trying to say ...
are you saying that when it reads M08 the coolant is not coming on ...
are you saying you are using M09 to activate it...
are you saying that it is an electrical/computer problem...

a little more information would be helpful in aiding you with your problem

Try this : in MDI mode enter: M8 M18 M118 push start.
all 6this will activate all your coolant pumps.
Good luck!