Hi,
I will modify a milling-machine from hangzhou westlake to cnc but i dont know how. Anybody know milling-machine from hangzhou westlake model ZX7016? I have pic but i dont know how to upload the pic here.

This?

http://www.image-share.net/image/1674/thumb/HBM16.jpg (http://www.image-share.net/view.php?name=HBM16.jpg&car=1674)

Tito

this is Westlake ZX7016.

http://www.znjs.com/trade/Electric%20Hand%20Tools/ZX7016.htm
Interesting:
They show the ZX7016 with a 2 slot table but your picture shows a 3 slot table? :confused:
Is your table size 420mmx152mm?

Also, they make no mention of X-Y table axis travel.
Do you know what yours, or theirs, is?

Good luck,
Pres

This is Drill/Mill-ing machine from Hangzhou Westlake model ZX7016. They have 3 slot table. Dimension of worktable surface is 430x200 mm.

Tito:

Iam newb, would like to know what is that? -->
Thanks.
Ata.

ATA,
Apparently, you know something the factory does not know about their machine tool.
Their website gives a table size of 420mmx152mm for the ZX7016. (read it).
But you state your ZX7016 has a table size of "430x200 mm".
Are you sure you have a Drill/Mill-ing machine from Hangzhou Westlake model ZX7016?

Also, their picture CLEARLY shows a 2 slot table, not 3!

Lastly, the picture you provided http://www.cnczone.com/forums/attachment.php?attachmentid=22701&d=1158032113 appears to be a heavy duty dual-screw Z axis driver with a digital scale position feedback.
It looks plenty rugged for Z axis movement.
(dual lead screw is usually just needed on a big x axis)

Can/will you determine the disparity between the factory specs on their website and your ZX7016?
Can/will you give the ZX7016 X-Y axis travel (since the factory does not provide that information)?

Bellow are from the Drilling and Milling Machine Model ZX7016 Operation Manual:
Max. Drilling 16mm
Max. Face mill 50mm
Max. End mill 12mm
Travel of Spindel 115mm
Spindle speed 12
Distance spindle axis to column 240mm
Distance spindle nose to table 7-307mm
Travel of spindle head 300mm
Working area of table (LxW) 430x200mm
Travel of table (LxC) 236x128mm
Motor 550W
Overall dimension (LxWxH) 856.5x715x967mm
Net weight 170Kg

haha Hangzhou ZX7016 ,it's made in China
the Fty website current no ZX7016 now, I only find this
http://www.westlakemachine.com/product-DandM(eng).htm
click on ZXJ7016 pic will open a detail of this mill

Max. dilling capacity ……………………………………16mm
Width of face milling……………………………………50mm
Diameter of vertical milling……………………………12mm
Spindle travel………………………………………… 115mm
Distance spindle axis to column surface………… 240mm
Max. Distance spindle nose to worktable………… 360mm
Spindle taper………………………………………………MT.2
Spindle speeds rang………………………… 365-3150rpm
Spindle speeds……………………………………………… 5
Dimension of worktable surface…………… 430×200mm
Travel of worktable…………………………… 236×128mm
Overall height………………………………………… 967mm
Motor………………………………………………………550W
G.W/N.W…………………………………………… 225/175kg
Ship measurement ………………………… 97×56×94cm

Spindle travel………………………………………… 115mm
hi,ata will you use this 115 mm for Z axis? enough or not for you?

and titoniks
i read you pic , you have a finished Y axis stepping motor conversion?
if possible, can i see detail pic or design , i am interesting on the connection between the origin Y axis and stepping motor(gear or belt?and how?)

i used belt for all 3 axis

for Y axis i have mounted the pulley on the hand wheel

This is Drill/Mill-ing machine from Hangzhou Westlake model ZX7016. They have 3 slot table. Dimension of worktable surface is 430x200 mm.

Tito:

Iam newb, would like to know what is that? -->
Thanks.
Ata.

the first is a digital scale

the second is a ER25 collet holder

Spindle travel………………………………………… 115mm
hi,ata will you use this 115 mm for Z axis? enough or not for you?


Yes, enough, I use to mill small piece of alu with max high only 100mm.

Do you know whatfor is this? -->

Hi titoniks, thx!
you pic enlight me! and i will find a steel board about 5mm thick to connect mill and motor like yours. it's really a easy solution!

Hi titoniks,
could you show me your new acme/ball-screw, thx.

Ata

Yes, enough, I use to mill small piece of alu with max high only 100mm.

Do you know whatfor is this? -->

If that is a West Lake Drill, the arrows indicated in your picture is for adjusting the motor mounting plate.

This?

http://www.image-share.net/image/1674/thumb/HBM16.jpg (http://www.image-share.net/view.php?name=HBM16.jpg&car=1674)

Tito

I´m interrested to by a similar machine as you have on your picture.I want to know if you is satisfied with it´s performance and precission and what kind of work you doing with it.
(It was a long time ago you post it but i had to try to get an ansver anyway)

Best regards Christer