Fellow Bridgeport owners:

I have a older B-Port milling machine (Model 4449. S/N J-71768) and need a little help. It looks like the high-low speed clutch control and spindle brake and lock mechanisms have to be removed. Are there any things I need to be made aware of in disassembling the head? Also, do you have a recommended source for a service manual? I have an Operators Manual.
Thanks for your help.

Ken

I have an operation and maintenance manual scanned, it has a basic maintenace section. You will find it here http://mysite.wanadoo-members.co.uk/hoodsmachiningpages/index.html

Hood

Hood,

Thank you for your help. This looks like what I need.

Ken