just wondering if there were any OZ DIY cnc router builders here with local links and what plans they used etc

many thanxs Dave

oh i found this link for some stepper motors hmmmm
http://www.automationdirect.com.au

Hey Dave, have a look at this thread :

http://www.cnczone.com/forums/showthread.php?t=3125&page=5

Last couple of posts on the last page, Lachlan (LPNMB) has posted a nice list of suppliers, I have checked a few, he did his homework.

As for DIY machines, mine is here :

http://www.cnczone.com/forums/showthread.php?t=22101

Although I can't say I used any plans, just kinda made it up as I went along (ya I know it shows!)

Nearly finished, just gotta put in leadscrews, steppers and hook it up (and stand back...)

If you want some plans, do a search for JGRO, free plans, MDF construction and the finished machines are pretty sweet, although the measurements are in inches.

I think joe2000 has free plans as well, his 2006 model as he calls it is very nice as well.

If you start building, make sure to post heaps of pics !!

Russell.

Are you aware of the Australian New Zealand forum

thanxs 4 the replies im new to the forum and am now aware of the aus/nz forum cool

and i got the excell file heaps of links in that

many thanxs Dave

thanxs 4 the replies im new to the forum and am now aware of the aus/nz forum cool

and i got the excell file heaps of links in that

many thanxs Dave


hi

care to share dave ;) ;) ;)

where abouts are you from dave ??

cheers

yer im in the southside of Brisbane
also was considering Solsylva plans dont no if any one from oz has built one of these units pity he doesn’t have a pdf version save freight o well from what I have been reading they are ok as I don’t have a clue about cnc I will need something to start me off

hmmmm and maybe a foam cutter as well

Im into rc plans and was thinking this could assist me in construction work etc but I just like to make things I guess

argh work beckons
must go get ready

hi

Dave , try these guys , and if you go to mach3's website in there links section there are a few really good sites thats work in conjuction with artsoft.com

Marc's website is a great one and yes his in Melbourne Australia frieght costs would be a third as compared to overseas shops and not to mention speed of delivery www.cnckits.com.au

http://www.homanndesigns.com/index.html

http://www.lowcostcncretrofits.com/Australia.html