i need to know of a new way to position my spoil boards on the table without having to screw down and tape for sunction, also it needs to be some type of quick disconnect.

Hey StanMan, Welcome to the Zone.

I use these T tracks. They are fairly inexpensive and allow the use of standard 1/4" bolts.
http://www.hartvilletool.com/product/11036

Also Rockler has a version:
http://www.rockler.com/ecom7/product_details.cfm?sku=5325&cs=1

Can you just install T-nuts up from the bottom of your table? This would be really cheap and allow you to make many different kinds of hold down jigs by bolting from the top.

Steve

At The Present I Have Put Threaded 5/8 Studs In The Corners Of My Tables And Put Holes And Metal Inserts In My Spoil Boards. I Am Going To Try This But Was Looking For Another Option.