|
View Full Version : What about these steppers? blfinche 08-25-2006, 09:32 AM What do you think about these steppers? STEPPER MOTOR SLO-SYN MOTOR M092-FD-8109 Are they a good buy at $30 bucks? http://www.electrosales.com/warner/slosyn/m09.htm Bobby aggie_67 08-25-2006, 11:00 AM Just a newbie myself but the 4.6 amps rule out most DIY drivers. Madclicker 08-25-2006, 11:06 AM The 092 has a nice flat torque curve. I'm using a 4 wire version of this with a gecko on my z and get 100+ rapids. This is an 8 wire motor and should go even faster. I think it's a very good choice and buy for a mid size router. Madclicker 08-25-2006, 11:19 AM Just a newbie myself but the 4.6 amps rule out most DIY drivers. 3.25A series and 6.5A parallel. Madclicker 08-25-2006, 11:35 AM Are you talking about these? ebay item (http://cgi.ebay.com/STEPPER-MOTOR-SLO-SYN-MOTOR-M092-FD-8109-NEW-in-BOX_W0QQitemZ230020767986QQcmdZViewItem) If so, you should consider the shipping. It's $25 to my house and I think that's way too much. I wouldn't buy them. blfinche 08-25-2006, 12:56 PM That's the one and the shipping is brutal. Thanks for the advice. |