squarewave
12-09-2003, 10:49 AM
Is there a way to display multiple coordinate systems at the same time? For instance "Distance to Go" and "Absolute"?
Thanks for any hints!
Thanks for any hints!
|
View Full Version : Multiple Axes Readouts squarewave 12-09-2003, 10:49 AM Is there a way to display multiple coordinate systems at the same time? For instance "Distance to Go" and "Absolute"? Thanks for any hints! HuFlungDung 12-09-2003, 12:48 PM It would be a nice feature to see added, wouldn't it? You can switch the display modes now by creating an M function for it, but you likely are already doing that. camsoft 12-12-2003, 01:02 PM Steve, Make a button that the runs the Macro [READOUT TOGGLE] It toggles up to 8 axes position readouts between these 4 modes. INCREMENTAL MODE ABSOLUTE MODE DISTANCE TO GO RELATIVE TO MACHINE ZERO Also use the PgDn keys to rotate between the G code display window and position readouts then press PgUp to blow up the readouts or G code window to full screen with large fonts. Tech Support CamSoft Corp. (909) 674-8100 support@camsoftcorp.com www.cnccontrols.com |