Post your Bobcad ver19 tip and tricks here!

TIP#1:

To add a ctrl+Z do the following:

1. Select the Special/NC CAM menu and then choose RECORD SCRIPT and then MENU CONFIGURATION from the sub-menu.
2. Under Menu Type enter CAD.
3. Under Number of Menu Levels check #2.
4. Menu level 1 needs to be set to 1.
5. Menu Level 2 needs to be set to 5.
6. Key: Z (not the #2...use the letter Z)
7. Check the Ctrl option and un-check Alt.
8. Select EDIT and you should be good to go.

CNC Dude
:D

Pi in V19 scripts

The function Pi is not defined in the V19 scripting language.

A temporary work around is to add the following at the beginning of the script---

Pi=3.14159265358979323846264338