PDA

View Full Version : CNC machine video



cncadmin
11-17-2003, 11:17 PM
Here is a video of my homemade wood CNC machine-

http://www.cnczone.com/movies/cncmachine.wmv

I sold it at the begining of the year to buy a vertical mill.

anoel
11-17-2003, 11:56 PM
Very cool. Very smooth stepper set up.

Mr.Chips
11-18-2003, 12:56 AM
Pretty Nice.

What is the Inches Per Min? This will help a lot of the Newbies like me to get a feel for the speed. It's always been an unknown.

Hager

cncadmin
11-18-2003, 01:09 AM
I think it's somthing like 7-10 in min.

bb99
11-18-2003, 12:56 PM
Nice!

HuFlungDung
11-18-2003, 01:06 PM
Okay Paul, now lets watch it cut something :)

cncadmin
11-18-2003, 01:24 PM
I cut this out on that machine-
http://www.cnczone.com/showthread.php?s=&threadid=65

xairflyer
11-18-2003, 04:08 PM
Love the video,

Do you have any stills of your machine

cncadmin
11-18-2003, 04:11 PM
Yes here- http://www.cnczone.com/photopost/showgallery.php?cat=500&ppuser=1

umrk
11-19-2003, 08:19 AM
Nice router!

Are you sure about the IPM? That looks closer to 50-60 IPM (abt 3/4 to 1 in/sec) while jogging to me.

What leadscrews did you use?

mike

Darren_T
11-19-2003, 09:46 AM
Originally posted by umrk
Nice router!

Are you sure about the IPM? That looks closer to 50-60 IPM (abt 3/4 to 1 in/sec) while jogging to me.

What leadscrews did you use?

mike

You know, I was thinking the same thing but figured I must be wrong since I'm new.

That thing traversed the entire length of the table in a whole lot less than 30 seconds. I'm figuring you are about right with an estimate of 50-60 IPM.

Darren