I have a GeFanuc 21imb with the machine Spinner VC560 12000rpm... I want use HSM with G05.1 Q1, as machining there stands "AICC" or "AI NaNo", but shakes more than normal when changing his direction along y or x axis ? Can be there a parameter which help me, or is there any g-code whic must be off if i want to use HSM? Can anyone help me ?

Serkan

Serkan,

For the AICC to work, I think you have to command G49
and the code for higher feed compensation is Q4 (smoothest)...
Q1 is for fastest...

G49 (put this at the beginning of the tool)
G332 R4. (Turn On Ai Nano to tightest level of accuracy)
G05.1 Q1 (accurate arcs)
...

You must turn off AICC at the end of each tool (before tool change).

Omega

Please contact Cenk KOC.

At cenkkoc@spinner.com.tr

They can help with your requirement.

very best,

Mac