I have seen it and i want to use it. Does anyone have a ready post processor for Mach 2/3 so i can do code for my machine? I dont know how i shall use the wizard and what template i shall base it on.

Any success with this? I use edgecam code in mach3 now with some manual editing but it would be nice to generate Mach3 code directly.

any hints are welcome
kind regs

Can you send up some code examples? I dont know anything about the Mach2/3. If it's G-Code you should be able to use the Wizard to get it right pretty quickly.

Mike Mattera

Hi I have this. It's a post for Mach2 and I think I will work with mach3 also. I wrote this one to a friend so I belive It is some bugs there maybe. But in the you have all the files so you can modify the post your self. I take no responsibility for problems regarding this post. Unzip the file and copy the files to the c:/programfiles/edgecam/machdef folder.

If anyone have edgecam post for deckel I in very interested.

Works fine with mach3 ( with the stuff i tested so far...) Tnx alot.
kind regs

I think there could be a bug that can give a strange z move in the beginning. Or maybe I have fixed that. If you find any problems tell me and I can try to fix it.

i have tried this file with Edgecam...and i am getting this error msg:
"R i j k words all missing for arcLine 116"
in mach3

what seems to be the problem?...can any1 help me?

If you could upload the edgecam file the NC code and maybe you know wich line it stopped at. Then I can fiks this I belie. I made the post for Mach2 so I belive I can modify this.

I belive that this is a bug with arcs. But probably it only appears somethimes. Because this is not a message you get always or what?

Thanks for your quick reply...

I think i did something wrong with the original files...(dont know what)...
but, then, i recopied your files from the zip file and then did it again and it was working just fine...

i am really sorry for this....

Thanks again for you help.

ali97 or anybody

Hello, !! I am looking for a post for cutting arcs on my lathe for Mach3. I just want to cut simple things to start. I am learning mach3 and not very good at g coding.

Cn anybody help?

mungaro

Have you resolved this issue? I'm having the same problem
thanks