|
View Full Version : What do you cut with your CNC router? widgitmaster 04-15-2006, 05:17 PM What do you cut with your CNC router? Where I put Aluminum, it should have been SOFT metals like copper, brass, aluminum, lead, zink etc..... Eric widgitmaster 04-18-2006, 06:15 PM My 1st CNC router will easily cut wood, plastics, and some soft metals! Eric bgolash 04-18-2006, 10:12 PM Hi So far the materials have been wood, aluminium, brass, and steel. Regards Barry Jason Marsha 04-19-2006, 07:29 AM My lot so far has been wood, aluminium, brass and plastics. I have some copper plate which will be the next new material. The metals are cut much more slowly than the wood and plastics as my JGRO is not nearly as rigid as a metal machine. Jason |