|
View Full Version : Capture Predator Simulation Xeno 03-25-2003, 10:39 AM I'd like to know if there is a way to capture Predator Virtual CNC simulation in frames or AVI, or Mpeg, Gif etc. I'd also be interested in other CNC simulation software that could do it. Thanks Paul_S 03-30-2003, 04:54 AM Check out this link for demo software for video capture from your PC screen: www.techsmith.com (http://www.techsmith.com) Xeno 03-30-2003, 07:24 AM That should work. Thanks Paul Grifftek 04-07-2003, 04:25 PM I have used hypercam http://www.hyperionics.com/hc/index.asp to capture simulations in the past, works pretty well and is real easy to use. I bleoeve that Lotus has a screen cam product as well. Here is a sample I captured with the demo hypercam: http://www.grifftek.com/dolphincadcam/avi/clip0017.avi Maybe we shoudl contact predator, maybe they would add this feature to their software. Xeno 04-07-2003, 11:37 PM Bill, Thanks for letting me in on this option. Your avi was loaded nicely. I'm suprised it was only .36 MegByte large (being an AVI). I can't believe predator doesn't have this option. It seems it would be an easy thing for thier software folks to integrate into thier packages. Oh well... Thanks Tony cadcam 04-27-2003, 10:43 PM Xeno VCNC will let you take screen shots of the file as it goes thru the stages of cutting this is a setting to tell it how often you want to take a snap shot. I will post later of were to set it. when I change my predator dongle to this computer and stat were it is. I forgot this is part of the setup sheet. Xeno 04-28-2003, 06:48 AM Let me know when you post it. Thanks cadcam 04-28-2003, 01:28 PM Here is a snap shot showing were and what the option is. There has been talk at the office of beable to implament AVI support we have been talking about. http://www.cnc-programming.net/artwork/vcncjpeg.gif |