I have the software disks from a TCL240 lathe that I am converting. I have the 80 track 5-1/4" BBC disks and the 3.5 floppy IBM Ver. 6.04. You pay the postage and I'll send them to you. :cheers:
Richard

Hello

Please contact Andy Starnes aws@ceramic-substrates.co.uk as I would like to obtain the software from you as we have a Boxford 240 TCL

Copy the file to a ZIP and send it via e-mail. Then toss the disks.

Saves postage and time.

If they don't/won't copy, however, press on as you were...

The problem is that if someone needs the BBC disk is that they are 5-1/4 disks.
I don't really want to have to hook up an old 5-1/4 drive. Now the IBM version is on a 3.5 disk, no problem.
:cheers:
Richard

Please forward on contact details as I'm very interested in obtaining a copy, I'm willing to pay any costs involved!