I am trying to find out how to tweak my post.
What software i might need also.

Thanks
fjd

Welcome to the forum.

Post Haste. It's an add-on.

'Rekd

I have this post Heid TNC 310 [TK] M1156.19m
its metric and returns dialog in somthing other than English
I am needing this in both metric and inch with english
dialog. I just don't now how to get into the post processor to tweak,or edit to work for me.The dialog is the big thing cause
I can tell gibbs when programming its mm and the post will be in
inches or the other way in inches will return mm

Thanks
fjd

PS The control I am working with is the HEIDENHAIN TNC 310
on an horizonal mill.

FJD, you do not have the option to change posts in Gibbs. the closeset option you have is the PostHast post that are in Gibbs and that to is minumal unless you buy the upgrade post option.

If you contact your deal;er they will be able to help you.
They are good about this.

Have you tried calling your dealer?

My dealer is who got me this post.

Originally posted by fjd
My dealer is who got me this post.

E-mail Gibbs tech support. I asked for mods to my posts and always received my new posts no later than an hour. You'll need to turn on the post processor name & code option in the preference menu, post a program and mark up the NCF file to show what you need corrected. Email both the NCF & VNC file to tech support. The part file is optional but it helps.

I aquired compost for gibbs i now can edit my post that i have the txt file for.