I need to mill an aluminum box. 4x2x2(deep). Please let me know if you can do this, and how to arrange a quote. I have the complete solidworks database for this product.
Regards, Jim

Jim-

Before anyone can quote it, post your SolidWorks file and any requirements such as type of aluminum, finish, when you need them, etc...You could also just email the data to prospective vendors. Ous is info@davidwolfedesign.com

I will send all information via email; please contact me at jim.girardeau@sbcglobal.net with your email address/phone. Thanks, Jim

I need to mill an aluminum box. 4x2x2(deep). Please let me know if you can do this, and how to arrange a quote. I have the complete solidworks database for this product.
Regards, Jim

Jim, i can do this box. Ron Lamy 336.841.2201, blueridgetool@northstate.net

Yo blueridgetool, after e-mailing them to send me their prints I noticed the date on the RFQ Post (( 3-28-2006 )), this leads me to believe that you stumbled on an old awarded post & I followed your lead.

Newbie (flame2)