phoodieman
03-24-2006, 05:47 PM
I need a MC post for a Mitsubishi Meldas 500 controller. Running a Daewoo Puma 8S.
Fetterz
Fetterz
|
View Full Version : Post for Puma 8S phoodieman 03-24-2006, 05:47 PM I need a MC post for a Mitsubishi Meldas 500 controller. Running a Daewoo Puma 8S. Fetterz psychomill 03-25-2006, 08:16 AM Your dealer can supply you with a post for this. What version are you using? MC8 and 9 has generic posts for Meldas on the CD. If you're using MCX, you can use the "updatepost" utility in X to bump up the post. If you need the post modified some, your dealer should help you as well as we can probably help you out here... :cheers: phoodieman 03-27-2006, 04:57 PM The Meldas is a mill post. I need lathe. Turns out the MPFLAN works OK.. I had to edit the G76. It would put an E instead of F in the feedrate. Quick edit though. I'm happy and making parts. Chris |