Hi,

Do you guys think that a off the shelf CAM with a modifiied post be abe to generate a tool path for a machine like this, and use something like MACH to move it?

I was thinking maybe manualy draw the lines on a different layer in CAM that need to be cut with the water jet and the rest with the saw?

Click the video link:
Machine (http://www.breton.it/dynamic/en/catalogo/schedaProdotto.php?id=150&#)

Thanks all!!

An off-the-shelf CAM software should be able to do program this machine. I use MasterCAM myself, but any software you have (with the adecuate post of course) should be able to do it.