These two postprocessors for FeatureCam 12 (2006) are modified and adopted to Mach-3 mill and turn, in inch modes. They both employ “exact stop” modes, and will work with no problems on all systems (even the ones that have that have the backlash enabled). The ZIP contains the posts, documentation, and two g-code examples showing you the output. I am also attaching the FeatureCam configuration file.

Download from:

http://cnc.novalab.org/mach_files.htm

Regards,
Chris K.

Chris :

I just downloaded your turn posts for Mach 3 turn. I am new to this cnc lathe machining and do not know to much about cnc turning. I do have a problem with your screen in one aspect. (please remember, I am new). Where do you have the cycle start button located?

mungaro