Hi!

Anyone knows about a G code translator for a Galil Motion controller , besides camsoft.

Any other options ??

Galil has a translator they sell on their web site. There is also at least one other company selling host software for Galil. I read about it here on the Zone a while back. Sorry, I forgot the name of the company, but I remember it only cost about $350.

Karl

Are you looking for just the G code translator, or something that includes an operator interface?
The Galil one is just a converter.
Some years ago, Galil were selling an operator interface (OPINT) that unfortunately got dropped , I believe one of the reasons was it was DOS based, It was a great little interface that had alot of potential. I still use it to this day but will only work on the legacy products. If it had been developed to included G code translator it would have been great, screens can be drawn in seconds.
The beauty of it was is, it down loads Galil native language files.

Another system to look at is the Acroloop (taken over by Parker), they have a full CNC system out called MotionMax, I have'nt had the opportunity to try it yet, but cannot speak highly enough about Acroloop cards, I have used their older DOS based CNC.
The thing I like is the Built in PLC which is opto-isolated.
If you find any other convertor, let us know.
Al.

thanks

I am looking at just a simple G code translator where I can give a G code file to the transalator and it outputs an equivalent Galil Code.

The front end can be designed separately as per the application in VB.

I am hoping Karl can remember the name of the company that had the product.

dxf to gcode to Galil DMC software demo

--------------------------------------------------------------------------------

To obtain a demo laser CAM application (named gdmc) for Galil bus-bassed servo controllers follow this link
http://www.goldtreesystems.com/testing.htm

Though the software is evolving and has some gcode and dxf import limitations it is very capable of performing the laser cutting and engraving jobs it is designed to do.
Currently I am developing a raster processing mode and galvanometric scanner interface. Feel free to contact me about customizing gdmc to fit your application needs.
Thanks, George

dxf to gcode to Galil DMC software demo

--------------------------------------------------------------------------------

To obtain a demo laser CAM application (named gdmc) for Galil bus-bassed servo controllers follow this link
http://www.goldtreesystems.com/testing.htm

Though the software is evolving and has some gcode and dxf import limitations it is very capable of performing the laser cutting and engraving jobs it is designed to do.
Currently I am developing a raster processing mode and galvanometric scanner interface. Feel free to contact me about customizing gdmc to fit your application needs.
Thanks, George
Dear george,

I had writtent to you for the pricing of your software but did not recv the same. Could you kindly reply on this and let me know. I am planning to use this with a DMC 1832 for a 3 axis application which will involve milling and routing.

regards

Sorry 'harrymen' but I did not receive your email.
The introductory price for the gdmc application will be dependent upon the number of Galil user interest in the product and how much time it will take me to meet (or exceed) any custom user requirement specifications. For the time being, gdmc is strictly a laser cutting motion control application. For the types of tasks you want to perform you probably want to inquire about Camsoft. I figure gdmc will have a limited audience because there are not that many companies building laser cutting machines using expensive (but very robust!) Galil controllers. My goal is to be able to price gdmc in the 300-500 dollar range once I get the raster scanner working and the dxf import filter fully functional. Until that time the updated versions that are at www.goldtreesystems.com/testing.htm will be free to use. I am buying and installing a new third party dxf filter and will have a new update soon.
I’m interested in you feedback so feel free to contact me directly: gmalone@wispertel.net if can be of any assistance with the demo program.

Cheers, George

dear george,

can you please send me a mail at "harish@strategiautomation.com"

I think you have not received the mails I have been trying to send you on the address you have mentioned.

regards

Harish

interesting program. will it work with galil 1700 series? isa bus controllers?

interesting program. will it work with galil 1700 series? isa bus controllers?

The command language for the 17x0 is identical to the 18x0. And his site states he's using the drivers from galil. So, with proper drivers installed, this software wouldn't know the difference.

I guess there's a slim chance it wouldn't work due to some weird incompatability.

Karl