|
View Full Version : RFQ CNC Plasma work needed ckrantz 02-22-2006, 07:28 PM Need 30 brackets plasma cut, I've made a basic DFX of the part and attatched it. These will be .250" thick 1018 cold roll. I haven't made the final .DFX of the part but this is basically it. I will supply the metal, I just need the machine labor. Give me an idea how much you will charge for 30. If everything turns out okay, good opportunity for many more different brackets I need made up. Verfur 02-23-2006, 12:18 AM does it have to plasma cut? How about waterjet cut no haz to deal with. John rpage 02-23-2006, 08:02 AM Sent you a private message. Thanks. Rick ckrantz 02-23-2006, 08:07 AM You can go ahead and quote me for a waterjet if you'd like. If its cost effective I wouldn't mind the better quality. Verfur 02-23-2006, 01:06 PM sent PM John ckrantz 02-25-2006, 08:07 PM Anyone else able to produce these using a waterjet or plasma? tjones 02-28-2006, 10:04 AM Will get quote back asap. Tim fuzzman 03-01-2006, 11:47 AM You have a PM. George Dave257 03-07-2006, 08:18 PM Need to know what tolerances and finish you want. makes a difference in the price..plasma creates a kerf (slight angle on the edge)..Can you accept that? Also , it may be cheaper to have the material supplied. why pay to ship it , unless you get someone local to you.. Dave |