PDA

View Full Version : DATA-CUT CNC Router Plans



CADCAM GUY
09-29-2003, 08:19 PM
Has anyone built or have any comments on the DATA-CUT Router design. It looks good, just wondering what people have to say about it.
I知 looking to build my first CNC Router, and I知 having a hard time finding a good design this one looked good to me.
http://www.data-cut.com
If anyone has a better design or can see some faults in this one, your in put would be greatly appreciated.

Thanks in advance!

CADCAM Guy

ninewgt
09-30-2003, 10:14 AM
The Data Cut machine is a good one - I can assure you. I did not build it but used his plans in my learning curve when I built my machine and got a lot of advice from Chris at Data-Cut. Chris knows as much about CNC as anyone out there and his machine reflects it. His plans are good, but they are not a step by step plan... but he is really good about email.
If his size machine is up your alley - go for it - Its a good machine.....

NeoMoses
09-30-2003, 11:41 AM
I see no problems with what he is selling. Looks like a solid design, and he gives .dxf files, along with lists of suppliers. That should be of immense help if this is your first machine.