Does anybody know a link to a MELDAS 50 operating manual (English version) ?

I only have the German version, and German language isn't by far my strongpoint.

Thanks

Try the MEAU site, they have alot of manuals in PDF now.
Al.

I'll checked the MEAU site, but without any success.
Radu

Try this one:

http://www.meau.com/Files/BNP-B2180.PDF

It's for the 60/60S but should be very similar.

Regards,
Scott

Thank you Scott.

I'll checked the link, the download started, but at 83% it stopped.

After that, when trying again (several times), it always generates a message like "thea meau site is inaccessible".

I also found a reference on meau site about that manual, but with no download link.

Anyway, thanks for your help.

For now, I succedeed to send/receive programs from/to PC/CNC, but I have no ideea how to set up the tools. That's why I badly need that manual. Trial and error is not a good ideea for setting the tools, I suppose :)

are you trying to only set tool length?

MetLHead
: THANK YOU VERY MUCH !Ihave already download it . useful