Is there anyone who have this or know what other post could be used?
Maybe some one have configured a standard default post?
For MCx, but maybe earlier posts can be converted.

Thanks,

Andy

Milltronics?, Centroid m15? never heard of a centronics. if it's a centroid, iwould guess either mcam or centroid would have a post. Todd

If you have an existing post that works ( from V9 and such ) then you can convert it for use in MCX. There's a C-Hook that comes with the MCX install called " Updatepost.dll ". Run that and select your earlier version post to convert. To get to the c-hooks hit 'alt + C' or go to Settings > Run user application, then select the c-hook.

Also, if you have MCX ( which would mean "recent purchase or upgrade" ) then your dealer should be able to provide you with one..... or at least cusomize one for you.

Thanks for the advise. I just got MCX and have not used V9 before. I got MCX installed on a computer along with 2 lathes and a mill off an ebay auction and the dealer is not happy to support. I can do basic stuff with the default post, but canned cycles don't work. If I deselect them I get horrendously long code with ridiculous pecks, so at the moment I write the code by hand. I checked with Centroid but they discontinued MC a long time ago. If any one have some idea on how to make the canned cycles work with any Centroid, (M400 for example), please let me know.

Thanks,

Andy

Andy, PM me, tsutt. Todd