Just want some help. Tray my first cnc .It works
I just Mach 2 demo now I want the engraving 10x bigger
How to do.
Thank you

Just want some help. Tray my first cnc .It works
I just Mach 2 demo now I want the engraving 10x bigger
How to do.
Thank you

We need a better explination of that you are doing and what you need. Just by the brief description looks like you want to scale your tool path?

Joe

That is wath a want.
If you have a lijn off 10 mm an I want to make this 50mm,
off a cirkle from 20 mm an a want 100 mm
I hoop you understand this my engels is not so good
fred

That is wath a want.
If you have a lijn off 10 mm an I want to make this 50mm,
off a cirkle from 20 mm an a want 100 mm
I hoop you understand this my engels is not so good
fred

you should really do that befor your g-code is generated, because of the tool offsets will not work properly i would think.

I believe Mach2 can scale each axis, but I don't know where you do it at. Check all the different screens and look for "scale".