Initial qty 20 sets. Estimated annual usage 1000 sets.

Please quote on qty 20, 100, 250, 500, 1000.

Located in Newtown, CT 06470.

Send email to lerman-quote6@se-ltd.com

Thanks,

Ken

Mark Kenny Products Company, LLC
203-426-4430

Initial qty 20 sets. Estimated annual usage 1000 sets.

Please quote on qty 20, 100, 250, 500, 1000.

Located in Newtown, CT 06470.

Send email to lerman-quote6@se-ltd.com

Thanks,

Ken

Mark Kenny Products Company, LLC
203-426-4430

I will make these parts for you for:
1-250 1.25 ea. + mat.
250-500 1.00 ea. + mat.
500-1000 .75 ea. + mat.

Or is it per set of three parts?

Also, I'll need a quote on the material you plan on using.

Are you planning on cutting the parts from sheet, from 1/4 inch thick by precut width strips, or whatever?

Ken

That is per part. And I will have to check out the price of the mat.
I was thinking of using 1/4 pre cut.
I will send you a price for the mat. shortly.

Can you make them one piece?

because another part slides in the groove. The pressure is applied by wave washers holding the assembly together.

It could be made in two pieces though. Parts A and B could be a single piece and part C a second piece.

Ken

I've selected a vendor for these parts.

I will keep everyone's email on file and send out email if I need other similar parts.

Thanks to everyone who quoted on these parts. I appreciate the effort that goes into preparing a quote.

Ken