I need a small brass plate about 1"X2"x.187 with two lines engraved in it:

WM SELLERS & CO
PHILADELPHIA

The engraving needs to be .750 wide with normal spacing and needs to be mirror image. This will be used as a mold. Type style - Arial or similar.

For more info email me or post.

Thanks

Jack,
You may need to re-think your text width or font or both.

Using Ariel with the text width at approx .750, some of the distances between the lettering is less then .002.

This distance may fluctuate somewhat between CAD programs but still they will be quite close.

Ken