PDA

View Full Version : Have parts-next step?



landart
09-12-2003, 06:06 PM
I have gathered the following parts
machine
Xylotex 3-axis board
cooling fan
3- 116 oz nema 23 stepper motors
24 volt power supply
computer and software

Is there any website that gives any step by step instructions to putting this all together.....any help would be most appreciated, just itching to get it all put together ...Jim Stidham

kong
09-12-2003, 06:53 PM
This is the website to help you put it all together!
Just post what you need info on, and voila! Someone will explain. Alternatively, have a browse through all the projects in the homemade router section, as there is a load of info in there.:D