I have a need for a custom bracket to be cut on either lazer, water, or plasma. It is then bent with 2 90deg angles.

Length is 24" long with bends in this direction. First leg is about 1", middle about 3" and final about 1" forming a z shape (90 deg bends).

In total is 5 holes (3 on one leg, 2 in middle section), the leg with 3 holes has corners notched.

I have a DXF file I can email.

jeff@jsmanufacturing.com

Need 10-20 pieces depending on price. Could use 2-5 ASAP.

Jeff,

Probably a little late in responding to your post, but if not send your quote info to sales@incodema.com

Check us out at http://www.incodema.com , we are a state of the art
prototype sheet metal forming/fab shop. We have an internet quote/order
site and deal with customers big and small all across the US

If you can dream it ... we can do it.

Thanks
Ben