15 mm tapered fitting in 360 brass, machined from .625 stock.

Initial qty 20. Estimated annual usage 1000 parts.

Please quote on qty 20, 100, 250, 500, 1000.

Located in Newtown, CT 06470.

Send email to lerman-quote3@se-ltd.com

I've added a revised figure with a flat milled on the 3/8 diameter for a set screw.

Thanks,

Ken

Initial qty 200 each. Estimated annual usage 2000 parts (each type).

Please quote on qty 200, 500, 1000, 2000.

Located in Newtown, CT 06470.

Send email to lerman-quote3@se-ltd.com

Thanks,

Ken

Note: I've revised the OrificePlugShort -- dimensions have changed (been corrected) and the hole is no longer reamed. Also revised OrificeHolder to clarify (and fix) thru hole specification.

I've received several quotes on each part and will be contacting vendors this week to order parts.

I will also send email this week to those who responded but will not be selected at this time.

I will post two additional RFQs for small brass parts in the next few days.

Thanks again.

Ken

Thanks to all of you who have prepared quotes. I recognize the effort that goes into it.

Ken