|
View Full Version : Material removel mace 09-09-2003, 12:25 PM Here is an example of material removal feature the transparent green is the stock reference part is white inside stock i have material removels for all seq. in op010 mace pronc 09-10-2003, 02:53 PM Mace, i could be wrong but it looks like it's a expert machinist part right? mace 09-10-2003, 03:57 PM It could be made in expert Machinst But i preferr Pro nc pro nc is faster for me It is a Nasa Part pronc 09-10-2003, 04:09 PM Really? are all the wall are vertical? if so i'm very sure i can do it faster in EM than i do it in pro/nc. but tha's just me.:D :D :D mace 09-10-2003, 04:14 PM Yes all vertical but You must understand I have Mudf files that eilimainate programming of this part took 1.5 hrs to model then 2 hours to program post verify It was a make 2 pc. job done and shipped all in less than a day mace pronc 09-10-2003, 04:31 PM less than a day? you guys pretty quick. still i tend to think Em template is quick than udf since it usually takes a few click to redifine a feature in udf. EM template is almost drag and drop. plus stock removal is automatic and more accurate than pro/nc.but i have to confess i only use udf a few times. |