Mike Conboy
01-09-2006, 03:41 AM
Can anyone let me know where I can get a maintenance manual or at least an electrical schematic for a Series 1 Interact.
mike@macontrols.com
mike@macontrols.com
|
View Full Version : Bridgeport series 1 Interact schematics Mike Conboy 01-09-2006, 03:41 AM Can anyone let me know where I can get a maintenance manual or at least an electrical schematic for a Series 1 Interact. mike@macontrols.com Bear 01-09-2006, 03:56 AM Hi Mike Am re wiring B.P.int.might be agle to help,what spc.are you looking for? Bear Mike Conboy 01-09-2006, 04:40 AM Main thing I need is electrical schematics. If I can get a copy of a manitenance manual that would be even better. The machine is a series 1 Interact fitted with TNC145 controller. Bear 01-09-2006, 05:14 PM Hey Mike Dont have that,thought maybe somthing simple I had come across I could help with. Tried to get this one here working,first one problem then another then another etc. Trashed the Hadahine system,going back with Mach system & servos,a really rockin system. Bear machintek 01-09-2006, 11:03 PM Let me see what I have at the office. i do not know if I have a schematic specifically for the 145 but it may be very similar to the 151. It will be a few days before I will be back in the office. George machintek 01-11-2006, 11:32 AM I did dig through my office and do not have schematics on a series 1 CNC with the 145 control, nor with the 151 control. I am sorry. You may have to watch EBAY. George dmheiff 01-13-2006, 12:40 PM Hi Mike, I'm a new bee here not sure if i can help. I have axcess to an Interact I Mk2 maintenance manual with Heidenhain TNC 150B - 151A or 155A controls. Or another manual with 151B or 155B control. If either of these would help I could copy a few pages. Dave machintek 01-13-2006, 03:13 PM An interact1 MK2 has a spindle drive, a much larger spindle motor, etc. You can send it to him but it will be of limited value. My service tech in TN has some of these machines and in his travels, he will obtain the schematics. The time frame is unknown. George RMARCH 02-23-2006, 04:24 PM Hi Mike , I have the Schematic Diagram for the TNC151 if you think it would help . Check this site out, maybe they have something you can use. http://www.machinemanuals.net/products.php?cat=11 awemawson 02-23-2006, 05:49 PM Can anyone let me know where I can get a maintenance manual or at least an electrical schematic for a Series 1 Interact. mike@macontrols.com Mike, I have it here in the UK for an Interact 1 with a TNC151 if that helps - problem is it is on an A3 sheet If you need it I can scan it probably as two A4 sheets AWEM Mike Conboy 02-24-2006, 06:46 AM I have a manual and schematics now but thank you to yourself and everyone else that offerred their help. px00001 03-12-2006, 11:36 AM i just brought in a bridgeport R2C3 with Heidenhain TNC141 control. Looking for electrical schematic for machine. If anyone can help perhaps taking a digital photo of the schematic, please email me or call me at 216-619-2675 in Cleveland. awemawson 03-12-2006, 05:48 PM Can anyone let me know where I can get a maintenance manual or at least an electrical schematic for a Series 1 Interact. mike@macontrols.com Mike, I have them for a TNC151 control on an A3 sheet if it helps - I could scan it as two A4's AWEM Mike Conboy 03-13-2006, 10:32 AM Many thanks but I have managed to get copies of the schematics now. Regards Mike Conboy |