Eclipse
12-18-2005, 02:04 PM
A self-portrait
I used a 60 degree V cutter 0.5 mm depth.
I used a 60 degree V cutter 0.5 mm depth.
|
View Full Version : self-portrait Eclipse 12-18-2005, 02:04 PM A self-portrait I used a 60 degree V cutter 0.5 mm depth. JFettig 12-18-2005, 08:39 PM what program did you use to program that? Jon Eclipse 12-19-2005, 01:43 AM I used VCarve Wizard and the clipart is from Vectorart. http://www.vectorart.com/ http://vectric.com/ |