PDA

View Full Version : New Machine Build NO IDEA WHERE TO BEGIN



BOATDUDEGUY
05-17-2012, 09:27 PM
im planning on purchasing the DIGITAL WOOD CARVER soon

never owned a cnc machine, never operated a cnc router

ive got all the software needed mach3 and aspire
ive been playing with the mach 3 software and believe i know enough to
get started,

but
will i need to set machine numbers?
machine limits?


ive got no idea

Benonymous
05-18-2012, 04:39 AM
Is this a ready built machine or a kit? Either way I'd expect there would be some sort of manual that will get you started down the right path.

BOATDUDEGUY
05-18-2012, 06:52 AM
Is this a ready built machine or a kit? Either way I'd expect there would be some sort of manual that will get you started down the right path.

it is a ready built machine

CarveOne
05-18-2012, 09:15 AM
Digital Wood Carver (http://www.digitalwoodcarver.com/)

vtx1029
05-18-2012, 09:37 AM
I'd ask Digital wood carver for the mach 3 XLM file. You should be able to put that file in your mach 3 folder and then be able to open that profile from the mach 3 loader. It may not be perfect but it should get you in the ball park.