I decided to purchase Vcarve, onley after a few days of testing
the trial version.
The program make me look like a professional :cool:
I will test the nc file as soon as i get a 60 deg. V-bit

Riven

Hi Riven,

Great to see you are enjoying using VCW!

Are you running a home built or commercial table?

Tony

This is a picture of my DIY router, most of the parts is
Salvage from the waste container.

Moon 1.27Nm stepper motor
Xylotex 3 axes stepper driver
24v 10A power supply
ACME 12x3 mm lead screw (soon to be upgraded to balls crews 16x10)
Bosh router 550w
Mach3
VCarve
Turbocad 10.2 pro