PDA

View Full Version : Software



rcrabb
08-22-2003, 07:31 AM
Can someone recomend a good CHEAP!!!! widndows based control program. I'm running a fet3 system from stepper world.

cncadmin
08-22-2003, 07:46 AM
Marh 1 is free or to get more lines of code to run it's about 100.00.

ger21
08-22-2003, 07:49 AM
I believe it's $150

Gerry

ger21
08-22-2003, 07:52 AM
Also, from everything I've read, it's probably the only real option out there, Unless you look at something like DeskCNC which needs extra hardware as it doesn't use the parallel port. Mach1 / Mach2 are the only viable parallel port options under windows.

Gerry

lsfoils
08-22-2003, 08:31 AM
... and it works great, too!!!

rcrabb
08-26-2003, 07:34 AM
I tried Mach 1 over the weekend. It is exactly what I was kooking for. My steppers ran perfect. Thanks for the recomendation.