Hello,

When on the CAM page in DeskCNC and running a cut program, or even when just jogging, the tool path will shoot lines off vertically once in a while. I am using steppers, so no encoders to do such a thing, right? It doesn't seem to affect the part being milled, just that the tool path screen will look goofy, but who knows what else may be going on... I was wondering if others have experienced this. Also, I'm running Win 98.

Thanks, John

What version of DeskCNC? There were some interim builds about a year ago that had a display problem like this.

Past stable builds are archived at the DeskCNC download link on the imsrv.com web site.

Fred Smith - IMService
http://www.cadcamcadcam.com/hobby

Hello,

Hope everyone had a Happy Thanksgiving with their friends and family.

I have DeskCNC 2.0.1.14

John

Upgrade to a newer version, at least 2.133 (2.0.1.33). This is archived on our web site at http://www.imsrv.com. Request the demo to locate the archives. There is no charge for the upgrade.

Fred Smith - IMService
http://www.cadcamcadcam.com/hobby