It is likly that those acustomed to the Haas control already know this but in case you are new to them as I here is a little tip I discovered today.

You already know the Home/G28 key will rapid all axes to machine zero, but for those times you want to move individual axes to home you can also rapid just one axes (X, Y, Z, A or B) to machine zero.
Enter the letter X, Y, Z, A or B, and then press HOME/G28 and that axis alone will rapid home.

Neat Huh:)

Ken,

Sounds like you are getting to know your machine a little better every day. Fun yes?

Just remember: You are the master of the machine, not the other way around. And believe it or not, you ARE smarter than it is also.:D

Hmm, good idea. I think I'll add that function to my mill retrofit later on.

With PCbased cnc, then you're the master :D