Does anyone out there have an engraving macro for a Fanuc control?

Don't bother. Use desk engrave by Deskam.

www.deskam.com

It's free and easy.

Atom.

Yep. Atom is right. DeskEngrave is better than any Fanuc Macro, unless you are looking for something like putting serial numbers on your parts and want the number to increase sequencially on each part. Then you're going to need that Macro.

One thing I had fun with using DeskEngrave was using a picture font (WingDings, ect.) and you can add little pictures to your engraving projects with ease.

Hey Atom,

Looking at your avatar, did you make those?

Do you have any info on these 3d item? Websites? etc?

I have seen them somewhere before and planning on making one myself in future. If possible... I hope...Still bussy making my own CNC machine.

Greetz,

Ed.

Mr. Ed

Yep, made them myself. One, the cubes are fixed and the other, the cubes are loose inside each other. I can post the prog if you want (if I can remember where I put it).

http://members.lycos.co.uk/photopage/hpbimg/Cubes.JPG


Atom.

I can post the prog if you want (if I can remember where I put it).


That would be cool. :cheers:

'Rekd teh Where can I get me one of these!

First of all machine a cube 46mm square. ( all programs are in metric). Then run this program on each face. Z "0" is the top face, XY "0" is the centre of the square. I've also included the macro's used in the program. Have fun.

O0001(CUBE)
M06 T01(6MM DRILL)
G0 X0 Y0 G57 S3000 M13
G43 Z10 H1
G83 Z-24 R1 Q3 F300
G80 M09
N2 M06 T02(6MM SOLID CARBIDE L/S)
G00 X0 Y-3.G57 S7000 M13
G43 Z 1. H2
G01 Z-1.949 F100
G03 X 0. Y 3. I 0. J 3.F2000
X 0. Y-6. I 0. J-4.5
X 0. Y 6. I 0. J 6.
X 0. Y-9. I 0. J-7.5
X 0. Y 9. I 0. J 9.
X 0. Y-12. I 0. J-10.5
X 0. Y12. I 0. J12.
X 0. Y-15. I 0. J-13.5
X 0. Y15. I 0. J15.
X 0. Y-18. I 0. J-16.5
X-0.565 Y-17.991 I 0. J18.
G91 G03 X0 Y2 I0 J1
G90 G00 Z-1.8
X 0. Y-3.
G01 Z-3.899 F100
G03 X 0. Y 3. I 0. J 3.F2000
X 0. Y-6. I 0. J-4.5
X 0. Y 6. I 0. J 6.
X 0. Y-9. I 0. J-7.5
X 0. Y 9. I 0. J 9.
X 0. Y-12. I 0. J-10.5
X 0. Y12. I 0. J12.
X 0. Y-15. I 0. J-13.5
X 0. Y15. I 0. J15.
X 0. Y-18. I 0. J-16.5
X-0.565 Y-17.991 I 0. J18.
G91 G03 X0 Y2 I0 J1
G90 G00 Z-3.8
X 0. Y-3.
G01 Z-5.848 F100
G03 X 0. Y 3. I 0. J 3.F2000
X 0. Y-6. I 0. J-4.5
X 0. Y 6. I 0. J 6.
X 0. Y-9. I 0. J-7.5
X 0. Y 9. I 0. J 9.
X 0. Y-12. I 0. J-10.5
X 0. Y12. I 0. J12.
X 0. Y-15. I 0. J-13.5
X 0. Y15. I 0. J15.
X 0. Y-18. I 0. J-16.5
X-0.565 Y-17.991 I 0. J18.
G91 G03 X0 Y2 I0 J1
G90 G00 Z -5.7
X 0. Y-3.
G01 Z-7.797 F100
G03 X 0. Y 3. I 0. J 3.F2000
X 0. Y-6. I 0. J-4.5
X 0. Y 6. I 0. J 6.
X 0. Y-9. I 0. J-7.5
X 0. Y 9. I 0. J 9.
X 0. Y-12. I 0. J-10.5
X 0. Y12. I 0. J12.
X 0. Y-15. I 0. J-13.5
X 0. Y15. I 0. J15.
X 0. Y-18. I 0. J-16.5
X-0.565 Y-17.991 I 0. J18.
G91 G03 X0 Y2 I0 J1
G90 G0 Z-7.7
G00 X 0. Y 1.45
G01 Z-9.512 F100
G03 X 0. Y-4.45 I 0. J-2.95 F2000
X 0. Y 4.45 I 0. J 4.45
X 0. Y-7.45 I 0. J-5.95
X 0. Y 7.45 I 0. J 7.45
X 0. Y-10.45 I 0. J-8.95
X-0.328 Y-10.445 I 0. J10.45
G91 G03 X0 Y2 I0 J1
G90 G00 Z-9.4
X 0. Y 1.45
G01 Z-11.324 F100
G03 X 0. Y-4.45 I 0. J-2.95 F2000
X 0. Y 4.45 I 0. J 4.45
X 0. Y-7.45 I 0. J-5.95
X 0. Y 7.45 I 0. J 7.45
X 0. Y-10.45 I 0. J-8.95
X-0.328 Y-10.445 I 0. J10.45
G91 G03 X0 Y2 I0 J1
G90 G00 Z-11.2
X 0. Y 1.45
G01 Z-13.136 F100
G03 X 0. Y-4.45 I 0. J-2.95 F2000
X 0. Y 4.45 I 0. J 4.45
X 0. Y-7.45 I 0. J-5.95
X 0. Y 7.45 I 0. J 7.45
X 0. Y-10.45 I 0. J-8.95
X-0.328 Y-10.445 I 0. J10.45
G91 G03 X0 Y2 I0 J1
G90 G0 Z-13
G00 X 0. Y-2.36
G01 Z-14.868 F100
G03 X 0. Y 2.36 I 0. J 2.36 F1000
X 0. Y-5.36 I 0. J-3.86
X-0.168 Y-5.357 I 0. J 5.36
G91 G03 X0 Y2 I0 J1
G90 G00 Z-14.7
X 0. Y-2.36
G01 Z-16.735 F100
G03 X 0. Y 2.36 I 0. J 2.36 F1000
X 0. Y-5.36 I 0. J-3.86
X-0.168 Y-5.357 I 0. J 5.36
G91 G03 X0 Y2 I0 J1
G90 G00 Z-16.6
X0 Y0
G01 Z-17.923 F100
G03 X 0. Y-2. I 0. J-1. F700
X-0.0 Y-2. I 0. J 2.
G03 X 0. Y 0. I 0. J 1.
G01 Z-19.111 F100
G03 X 0. Y-2. I 0. J-1. F700
X-0.0 Y-2. I 0. J 2.
G03 X 0. Y 0. I 0. J 1.
G90 G0 Z10 M09
N3 M06 T03(6MM CARBIDE 90 DEG. CHAMF)
G0 X0 Y0 G57 S7000 M03
G43 Z10 H3
G13 X0. Y0. I21. D23. Z-2. R-2. Q1. F2000.
G13 X0. Y0. I13.45 D23. Z-9.797 R-9.797 Q1. F2000.
G13 X0. Y0. I8.36 D23. Z-15.136 R-15.136 Q1. F2000.
G13 X0. Y0. I5. D23. Z-18.735 R-18.735 Q1. F600.
G13 X0. Y0. I3. D23. Z-21.111 R-21.111 Q1. F400.
G61
G65 P8030 X-23. Y-23. Z-2. R10. I46. J46. K0.0 Q15. D23. F1000. S0.0 B4000. C0.0
G64 M09
M30
:8030(OUTSIDE FRAME MACRO CORNER CHAMF)
(X,Y = ABS. CO-ORDS. BOTTOM LEFT CORNER)
(Z = DEPTH)
(R = R PLANE)
(I,J = X & Y AXIS LENGTH)
(K = FINISH ALLOWANCE)
(Q = PECK)
(D = TOOL OFFSET NUMBER)
(F = ROUGH FEED)
(S = FINISH FEED)
(B = Z FEED)
(C = CORNER CHAMFER)
#10=#[11000+#7]
#11=#6+#10
#1=#3+#11
#20=#25-[#11+5.0]
#21=#4-[#3*2]
#22=#5-[#3*2]
#27=#24-#11
#29=[#25+#5]-#3
#15=#5003
#16=#4003
G90
G00X#27Y#20
G00Z#18
#32=#18
DO1
#32=#32-#17
IF[#32GT#26]GOTO1
#32=#26
N1G01Z#32F#2
G1Y#29F#9
G91G1X#1Y#1
G1X#21
G1X#1Y-#1
G1Y-#22
G1X-#1Y-#1
G1X-#21
G1X-#1Y#1
G3X-1.0Y1.0I-1.0J0
G90G01X#27Y#20F[4*#9]
IF[#32LE#26]GOTO6
END1
N6G00Z#18
IF[#6LE0]GOTO7
#1=#1-#6
#27=#27+#6
G00X#27Y#20
G01Z#32F[10*#2]
G1Y#29F#19
G91G1X#1Y#1
G1X#21
G1X#1Y-#1
G1Y-#22
G1X-#1Y-#1
G1X-#21
G1X-#1Y#1
G3X-1.0Y1.0I-1.0J0
G90G00Z#15
N7G#16
M99
:9013 (G13 HELIX MACRO)
(X = X POSITION)
(Y = Y POSITION)
(I = HOLE RADIUS)
(D = TOOL OFFSET)
(Z = Z DEPTH)
(R = R PLANE)
(Q = PITCH)
(F = FEED)
#8=#4003 (G90/G91)
#1=#5003 (PRESENT Z POS.)
#27=#26+#17 (Z + 1 PITCH)
#5=[#4-#[#7+11000]] (RADIUS)
G90G0X#24Y#25 (RAPID TO X0 Y0)
G0Z#18 (RAPID TO R PLANE)
#6=#5/2
G91G3X#5Y0I#6J0F#9 (ROLL ON)
#28=#18
WHILE[#28GT#27]DO1 (HELIX LOOP)
G3I-#5Z-#17
#28=#28-#17
END1
#29=[#26-#28] (AMOUNT LEFT IN Z AFTER DO LOOP)
IF[#29EQ0]GOTO10 (IF AT Z DEPTH GOTO FLAT BOTTOM)
G3I-#5Z#29 (HELIX TO Z DEPTH)
N10G3I-#5 (FLAT BOTTOM)
G90G3X#24Y#25I-#6J0 (ROLL OFF TO X0 Y0)
G0G90Z[#1] (RAPID TO INITIAL)
G[#8] (G CODE BACK TO PREV. G90/91)
M99


Atom.

I knew I seen one somewhere check this one out.
You'll probably need to tweak it for your control(or not)
http://www.cncci.com/resources/tips/engrave.htm
Let me know if you need any help.

PEACE:D

Atom,

I am so incredibly green on this subject, you wouldn't believe it. I have no trouble in building the machine, but making those files work with my future stepper engines, thats a complete different ballgame !

Would i have to copy paste these lines and save them into a vector file, and then importing them into a 3D CNC program?

I made a decent machine with stepper control from NC-Step. I have not fired-up the steppers, but that is near future.

I love to hear any tips, although i probably would have to post such a request elsewhere.

Thanks anyway,

Ed.

Mr. Ed

Sorry, but I know nothing about home built machines.

BTW, the cat in your avatar..... is it about to puke?

Atom.

Nope,

It's hiding a bird :D

The mechanical part of building is progressing according to "plan", but its the software that needs more attention on my part.

I'm trying to find out if there is decent freeware out there, that can manage "complex" manouvres, just like those neat looking metal cubes in your avatar.

Ed.

Originally posted by E-Stop
Yep. Atom is right. DeskEngrave is better than any Fanuc Macro, unless you are looking for something like putting serial numbers on your parts and want the number to increase sequencially on each part. Then you're going to need that Macro.



Hi, I'm new to the form but a did notice this message by E-Stop and i am looking to put numbers in sequence per part. i was wondering if anyone could help me out and push me in the right direction??????

thanks

I too, need to put serial numbers on my parts, I think i might have this macro stuff figured out, but i have a "new to me" fanuc 15M and I'm not sure if it has the macro option yet,
So, If someone has a idiot proof macro... could you please post it, and if you have "serialization" could you post that as well?
Thanks.