I have a project to recreat a wave panel. The template I have is approx a 24"x120" pattern. I need to make it 48"x120". The problem I am having is that all 4 edges of the panel are different. So I can't just copy the pattern next to it. I will attach a pic of the panel. Also if any one can help I have an autocad file.

Sorry i dont know how to attach the pic so if any one is interested I will e-mail it to them

Shawn

Ckick the "Manage Attachments" button to attach pics.

thank you.

Could you post the AutoCAD file? 2000 format, if possible.

I would but the file is about 8-9 megs after it has been zipped.

Can you upload it somewhere?

Hi John
With my software I can view your model but cannot modify it in any way.
I assume this in a decorative pattern where the actual dimensions are not critical.
My suggestion is this:
Rotate the model until the waves are horizontal (about 3 deg)
Trim the pattern until you have only one horizontal wave.
Trim again until you have only one vertical wave.
Copy translate along x and y many times to cover a large rectangle.
Rotate the pattern back (about 3 deg)
Trim the new pattern to the required larger rectangle.