Would anyone have the exact dimensions of a Maxnc Mill table?? I need the exact T slot spacing if anyone has it or wouldn't mind measuring one. Thanks. Jack.

Is it a maxnc10 or 15? I have a 10 and would be happy to let you know.

Jason

my maxNC 15cl with 12" of X axis travel table is 4" wide x 18" long (+/- 0.01")
there are 3 T-slots spaced 1.5" apart, so the outter two are .5" from their centerline to the edge of the table.

I don't know the profile of the slotting off-hand, but they take 1/4" bolts.

Hope this helps.. I know it has been a few months now.