utengineer04
09-12-2005, 08:52 AM
Hello, can anyone tell me who makes a good 50 taper tool setter (measurer)? And what other name brands are out there. Thanks, Brian
|
View Full Version : 50 taper tool setter utengineer04 09-12-2005, 08:52 AM Hello, can anyone tell me who makes a good 50 taper tool setter (measurer)? And what other name brands are out there. Thanks, Brian psychomill 09-12-2005, 11:24 AM In the machine or out of the machine? Mechanical, laser, optical...? You could be as simple as a taper holder and a height stand (or a Jo block in the machine), or full blown digital/electronic. Check Renshaw, Parlec, Lyndex/Nikken, Command, Carbaloy, SPI, etc, etc. utengineer04 09-12-2005, 12:42 PM Out of the machine, and optical. Something like in a tool rom, to measure the height and radius. psychomill 09-12-2005, 02:15 PM Then, check out Lyndex/Nikken, (http://www.lyndex.com/prod_preset.asp) Carboloy, (http://www.carboloy.com/) and Parlec (http://www.parlec.com/html/products/presetting.php) just to name a few. :cheers: psychomill 09-12-2005, 02:16 PM Then, check out Lyndex/Nikken, (http://www.lyndex.com/prod_preset.asp) Carboloy, (http://www.carboloy.com/) and Parlec (http://www.parlec.com/html/products/presetting.php) just to name a few. :cheers: |