i just got to the point of cutting some parts on my plasma and tried to download a part but a pcut message comes on and says it it limited to 1000 lines (buy pcut pro). the problem is pcut pro doesn't exist.is there any other software out there that will run a rutex 510b.
i really hate to tell my wife i spent 700.00 on hardware and software that is
i can't use.
i did order 3 gecko 320 drives and a breakout board (cnc4pc) for the next machine and the service from both was great.

thanks for any help
mike laws

valdimir came thru with the files that will let me run more than 1000 lines.
He also said he is working on a new verision of windows pcut. When this comes out it will make a great all in one plasma package.

Mike Laws

Hello,

I'm just about complete building a Plasma Machine using all rutex equipment. I was wondering what rutex equipment you were using. It dosn't seem to be very many folks using Rutex. The THC is where I'm at. I've got the machine built and the X,Y,Z, all working. Are you using the THC board? Thanks, Aj ajclay@cox.net

This was a really old post by me.
I would advice anyone looking for THC or other controls to talk to CandCNC.

Tom has some good stuff.
Just my two cents

There isnt any good software to run Rutex's THC

Mike Laws