I am 90% finished with my 1st homebuilt CNC. I have a copy of Visualmill basic 5.0 and plan use TurboCNC + HobbyCNC driver combo for the machine.

My question is: What post processor generator should I select in Visualmill 5 to convert the .DXF to Gcode for TurboCNC (since VM5 has over 30 choices and they all produce different outputs)?

Thanks all. This is the best site I've ever been.

Hi there:

Try this out. It was made from a TCNC user. I´m using it on TCNC with no problems.
Unpack this on c:\program files\MecSoft Corporation\VisualMill 5.0\Posts
and restart your VMILL; Then choose where to save your g-codes and good luck!

I hope i had helped.
See ya ! :cheers: