Looking for other members in the South-Central Tenn area. I am about 30 miles south of Murfreesboro, and about an hour below Nashville
(WITHOUT construction..hehe).

Anybody else in the general area?

Eddie Miller
sogregory -AT- charter -DOT- net

I am not real close but am in the general area, I am in Athens, Tn about 150 miles east of you.

Well, atleast we know there are 2 of us from tenn. so far. Any luck with building a CNC Mill yet?
I am working on mine still.. had to relocate my workshop to the shed outside due to dust issues with the car.
Now I need to get it re-assembled and re-aligned, and then figure out the software...

I have HEARD OF Athen, TN, but would have to look on Mapquest to actually locate it ...

Eddie

I am to lazy to build one I bought a k2cnc 39x25 I have had it for almost a year now and love it.

Im in Signal Mountain (Chattanooga). I would love to share ideas, info wity anyone in the area. Im collecting parts for a homebuilt CNC router. Im about ready to start building.
Home phone: 423-886-9455

I am near Ashland City. About a half hour NW of Nashville.

Building a 'hobbycnc.com' type rig. Mostly ready, electronics are going, most of the thing assembled (still need to make my Z axis). It was almost ready to run when we moved from TX last year. I'm just getting back to it now.

It is a light duty rig using a Dremel for the spindel. ... Like I said light duty.

Anyone in the area?

Anybody else in the general area?


I’ll resurrect this old thread.
I’m a Wire EDMer in the Murfreesboro area. :wave:

OK. So Ill Re-Resurect this topic as my first post. Im in Chattanooga, and am wanting to learn about CNC Mills/Lathes. Looking for all the info my little head can handle. How to build/what to build, what software would be good. etc. I come from the great state of North Dakota but now live down here. Growing up on a farm I collect Model tractors and want to get into making my own models for a display Im working on. Anyway..This is a great place.