MBG
06-23-2005, 10:13 PM
For a surface grinder. I used one before but never got the name of who made it.
Who makes these fixtures?
Who makes these fixtures?
|
View Full Version : cylindrical fixture MBG 06-23-2005, 10:13 PM For a surface grinder. I used one before but never got the name of who made it. Who makes these fixtures? DieGuy 06-24-2005, 12:06 AM With 5C collets? There are lots of manufactures out there. Check E-bay, I thing I saw a couple on there for cheap. DareBee 06-24-2005, 07:54 AM The really good fixtures have a V block that you indicate to centre (or offset) manually. They are by Suburban & Harig (others?) start at about $2k, hard to run a tool room without 1. MBG 06-24-2005, 10:50 AM The really good fixtures have a V block that you indicate to centre (or offset) manually. They are by Suburban & Harig (others?) start at about $2k, hard to run a tool room without 1. wow two grand? and I could run one on a surface grinder? all I wnat to do is side grind a cylindrical surface. |