|
View Full Version : anti backlash nut hpghost 05-15-2005, 06:49 AM hi, Anyone can tell me a show me with drwg or pics how to make a simple anti backlash nut? right now I am ony using a threaded plate as nut for the motion...but it is not perfect.... joecnc2006 05-15-2005, 01:07 PM hi, Anyone can tell me a show me with drwg or pics how to make a simple anti backlash nut? right now I am ony using a threaded plate as nut for the motion...but it is not perfect.... Here are the ones i just made, there are several post in the forums of a lot of types. http://www.cnczone.com/forums/showpost.php?p=80529&postcount=60 Dave's_Not_Here 05-15-2005, 09:06 PM Maybe try here... http://www.homecnc.info/ballnuts.htm The Wizard 05-15-2005, 09:16 PM hi, Anyone can tell me a show me with drwg or pics how to make a simple anti backlash nut? right now I am ony using a threaded plate as nut for the motion...but it is not perfect.... The ones I made can be seen in my project log here http://www.cnczone.com/forums/showthread.php?t=6244 in message #3. They work fine on 1/4-20 'all thread'. The material is nylon bar stock that I had given to me and the springs came from the local hardware store and I used a short piece of 'all thread' as the tap. Larry |