I have two small relatively simple parts that need to be created. Right now I'm going the machining route but maybe I would switch to casting if I could do it cheaper and easier. If anyone on this forum has a home/small business casting capabilities and would be interested in taking a look at the files for these parts, and creating them, please feel free to contact me at:

michael.reichert@gmail.com

And I'll email you the files right away!

Thanks!

Michael Reichert

O.K. :bs:

I would ask a mod to move this to the RFQ forum (http://cnczone.com/forums/forumdisplay.php?f=74)...it'll get more attention there. ;)


O.K. :bs:Http://users.adelphia.net/~javamoose/Smilies/twak.gif