PDA

View Full Version : UHU Servo Controllers



  1. Old big long thread on UHU servo controller.
  2. High Power UHU Thread (HP.UHU)
  3. Old Regular UHU (for 60V to 80V and less)
  4. Power supplies for UHU
  5. The UHU parts list, questions and improvement.
  6. The UHU wiki, questions and improvement.
  7. Irfan's UHU saga
  8. Heatsinking the HP-UHU
  9. Encoders & their wiring to the UHU servo controllers
  10. Actual limit on encoder frequency
  11. DRO linear encoder for uhu/hp uhu
  12. Want to start building a UHU Controller
  13. Three UHU HP to the PC
  14. Russian UHU by Hudognik
  15. Questions on the original UHU controller
  16. blaspheme !
  17. What NOT to do with the HP-UHU...(self inflicted)
  18. Need gcode or dxf file for drilling UHU PCB
  19. Pauls HP UHU drive project
  20. Regenerative power dump circuit
  21. HP UHU KITS with PCB's or ?
  22. Conclusion HP.UHU
  23. Assembled UHU DC servo motor controller
  24. Revised Bills of Material for HP UHU Drives
  25. High voltage low power regular UHU controller.
  26. Step Frequency on Old UHU Controller
  27. The reset switch
  28. Divided by 4 Counter for 2000 pulse encoder
  29. Ben's UHU saga
  30. Questions for my first build
  31. Original UHU current limit question
  32. Need help on my first built UHU servo
  33. Dose anyone Know If Uli is on Holiday?
  34. h-bridge for high power motor
  35. Andrey's UHU HP
  36. help the code
  37. HP UHU at 250V on a BIG GAMBIN 3C Mill
  38. i'm so lost!!!
  39. a good question about the UHU.HP
  40. Does Anyone Have A Schematic of A UHU In Servie
  41. Current Schematcs & support information
  42. UHU Low Power - They Work but how do I
  43. Need advice in my project
  44. Kit purchase info
  45. E-STOP Circuit for the UHU
  46. Power Schematic for Old UHU Please Advise
  47. new build
  48. Can not reset UHU Servo Controller
  49. Confusion on Old UHU encoder action
  50. Bidirectional Problem with UHU Board
  51. UHU Chip problems
  52. UHU programming cable
  53. OLD UHU POSITION ERROR
  54. High power UHU
  55. Power Dump Circuit
  56. ENCODER AMT102 PROBLEM
  57. Servo processor "upgrade module" - looking for volonteers.
  58. New HP UHU Build Capacitor Voltage
  59. Can i use UHU Such as this ! on my Lathe Machine ?
  60. My UHU Controller Run Motor In One Direction Only !!!
  61. Looking for a HP UHU
  62. board problem
  63. Chips?
  64. old UHU board
  65. kit / assembled units
  66. Need Explaination - Please
  67. Why not much activity in UHU forum ? Other servo controller ?
  68. Exciting Let Down...
  69. Current sense problem
  70. Servo module for UHU based drives now available.
  71. What i need to start building UHU servo controller?
  72. Upto date Parts List?
  73. http://gsst.wikispaces.com/
  74. UHU Servo controller with +/-10 Volt analog output
  75. reichelt.de now also in the netherlands.
  76. Servo Motors
  77. Need Help! Embeddedtronics UHUServo, works at 24V but not at 48V?
  78. UHU WIKI will be DELETED by wikispaces !
  79. Need Help! Hello, can you help me with HP UHU BOARD
  80. Problem Need 1 UHU servo controller ! Urgent.
  81. UHU (and HP) Parameters