PDA

View Full Version : UHU Servo Controllers

  1. Old big long thread on UHU servo controller.
  2. High Power UHU Thread (HP.UHU)
  3. Old Regular UHU (for 60V to 80V and less)
  4. Power supplies for UHU
  5. The UHU parts list, questions and improvement.
  6. The UHU wiki, questions and improvement.
  7. Irfan's UHU saga
  8. Heatsinking the HP-UHU
  9. Encoders & their wiring to the UHU servo controllers
  10. Actual limit on encoder frequency
  11. DRO linear encoder for uhu/hp uhu
  12. Want to start building a UHU Controller
  13. Three UHU HP to the PC
  14. Russian UHU by Hudognik
  15. Questions on the original UHU controller
  16. blaspheme !
  17. What NOT to do with the HP-UHU...(self inflicted)
  18. Need gcode or dxf file for drilling UHU PCB
  19. Pauls HP UHU drive project
  20. Regenerative power dump circuit
  21. HP UHU KITS with PCB's or ?
  22. Conclusion HP.UHU
  23. Assembled UHU DC servo motor controller
  24. Revised Bills of Material for HP UHU Drives
  25. High voltage low power regular UHU controller.
  26. Step Frequency on Old UHU Controller
  27. The reset switch
  28. Divided by 4 Counter for 2000 pulse encoder
  29. Ben's UHU saga
  30. Questions for my first build
  31. Original UHU current limit question
  32. Need help on my first built UHU servo
  33. Dose anyone Know If Uli is on Holiday?
  34. h-bridge for high power motor
  35. Andrey's UHU HP
  36. help the code
  37. HP UHU at 250V on a BIG GAMBIN 3C Mill
  38. i'm so lost!!!
  39. a good question about the UHU.HP
  40. Does Anyone Have A Schematic of A UHU In Servie
  41. Current Schematcs & support information
  42. UHU Low Power - They Work but how do I
  43. Need advice in my project
  44. Kit purchase info
  45. E-STOP Circuit for the UHU
  46. Power Schematic for Old UHU Please Advise